Manual operation with RMC (residual moisture control)
Industrial laundry OPL (on-premises-laundry)
Select the
program:
P1, P2, P3
or
timer, from
15 to 90
minutes
Select
tempe-
rature
Strong fabrics:
the machine stops
automatically when
the garments are
extra dry
Start:
Press the start/stop
button
To prevent
creasing:
Empty the tumble
dryer as soon as
the program has
ended.
487 18 39 01 - 300/500/750 - GB
Instructions for use
Check that
the filter is
clean
Uniform fabrics:
The machine stops
automatically when
the garments are
ready to put away
Stop:
Press the
start/stop button or
open the door.
Take care!
Garments may fall
out when the door
opens.
Load
garments
into the
machine.
15-90 MIN
High: 70 - 85°C non-iron/normal wash,
85°C
cotton and mixed fabrics.
Drying at normal heat.
70°C
Low: 50°C Fine wash/mild wash,
50°C
Delicate fabrics. Drying at low heat.
No heat:
suitable for airing bedspreads, duvets
and bedclothes, etc.
Ironing.:The
machine stops
automatically when
the garments are
ironing dry
(slightly moist).
Restart:
Close the door
again and press
the start/stop
button.
If the tumble dryer is not emptied after
the drying time has ended, an anti-wrinkle
program is automatically started.
This means that the drum rotates at short
intervals, thereby almost completely
avoiding creasing.
Extra dry
Ready-to-put-away
Ironing-dry
Time control, in minutes,
(15–90).
15-90 MIN
Time control.
The machine stops
when the selected
time has ended.
Drying time:
15–90 minutes.
The last few
minutes of the
drying time are
the cooling-down
period
(the garments are
cooled).
11