Lowering The Machine From The Transport Pallet - Electrolux T4900CR Installation Manual

4.1.2

Lowering the machine from the transport pallet

• Remove the machine's three rear panels.
• Remove the four screws holding the machine to the transport pallet:
– 2 screws (A) in the machine's trailing edge (inside the machine).
– 2 screws (A) in the machine's leading edge (under the machine).
• Lower the machine using a pallet lifter or fork lift truck and remove the transport pallet.
• Install the four feet on the machine's bottom rails.
Installation manual
A
A
15
fig.6771A
fig.6769A
fig.6768