The tumble dryer is usually delivered with a right
hinged door but the door can easily be changed to
left hinged position.
Disconnect the power supply to the machine.
Unscrew the door and the front panel.
Move the microswitch and the wires to the opposite
Turn the front panel and the door and mount them
Unscrew the door pin and move it to the position A.
Connect the power to the machine and check the
Start the machine.
Check that the safety lock is working:
The drum, ventilator and heat must stop if the
front door is opened as much as 50 mm.
Setup, 300/30 and 500/50
When unpacking the machine, handle it with
care. There are no transport clamps.
Position the tumble dryer so that there is plenty
of room for working, both for the user and for
the service technician.
The distance from the wall or other equipment
behind the tumble dryer should be at least 500
mm and the space at the sides at least 10 mm.
Note that, for servicing purposes, access to the
rear of the tumble dryer is required.
Adjust the machine to make it stand horizontally
and stably on all four feet.
The max. height adjustment of the feet is 15
487 18 39 01 - 300/500/750 - GB