PIONEER DJ DJM-S11 Instruction Manual page 99

Using Crossfader Start
1 Set a cue.
• For details on how to set a cue point, refer to the user manual for your DJ software.
• You can set a cue by moving the crossfader all the way to the left or right side while
pressing the [SHIFT] button during pause.
2 Set the crossfader all the way to the left side or right side.
• Set the crossfader to the opposite side of the channel which starts playback via
Crossfader Start.
3 Move the crossfader away from the left or right side while
pressing the [SHIFT] button.
Playback of the track starts from the cue point.
• Move the crossfader all the way back to the left or right side while pressing the
[SHIFT] button during playback to quickly return to the cue point and pause playback
(Back Cue).
• If a cue is not set, playback starts from the beginning of the track.
• Move the crossfader all the way from one side to the other while pressing the [SHIFT]
button during cue standby to start playback from the set cue point.
99
Fader Start