Settings In Serato Dj Pro - PIONEER DJ DJM-S11 Instruction Manual

1 Connect a multi player you want to control [DECK 1] to the
[LINE] terminals for [CH 1], and a multi player you want to
control [DECK 2] to the [LINE] terminals for [CH 2].
2 Take USB storage devices which have the control signals
saved and connect them to the multi players. Then start
playback.
3 Set the input selector switches of [CH 1] and [CH 2] on the
unit to [ A/B] (use [

Settings in Serato DJ Pro

SETUP screen
The SETUP screen of Serato DJ Pro is displayed as shown below when the unit is connected
(the illustration shows when the unit is connected to a PC/Mac for the first time after the driver
software/Setting Utility is installed).
CALIBRATION DECK : Serato DJ Pro calculates analog signals from a control disc and
1.
processes the signals for digital audio files. It calculates signal levels and device statuses
for each operating environment and sets up optimal settings for reading the control
signals.
If the CALIBRATION DECKS are not displayed, click the [Expansion Packs] tab, select
[Vinyl/CDJ Control] from the list, and mark the check box of [Enable Vinyl/CDJ
control].
A] for the example above).
1
31
1
DVS