PIONEER DJ DJM-S11 Instruction Manual page 80

— Down range:
–3
–7
• Press the [PARAMETER
button to shift the pitch range by a semitone.
Slicer Loop mode
A specified range is applied to the track divided into eight sections. The divided sections are
assigned to different Performance Pads.
Loop playback of the section assigned to a Performance Pad continues while you press the
Performance Pad.
• You can't use Slicer Loop with a track that doesn't have beatgrid set. For details on how to
set beatgrid, refer to the Serato DJ Pro software manual (page 7).
1 Press the [ROLL] button while pressing the [SHIFT] button.
The unit switches to Slicer Loop mode.
2 Press the [PARAMETER
pressing the [SHIFT] button to specify the range (domain) to divide
into eight sections.
• Each press of the button sets the domain as follows from the position where the
button is pressed.
— 2 beats
— 4 beats
— 8 beats
— 16 beats
Using the Performance Pads
–2 –1 0
–6 –5 –4
] or [PARAMETER
] or [PARAMETER
] button while pressing the [SHIFT]
80
] button while