The selected effect is applied, and the effect value changes according to the point you
touch on the screen.
Using FX Bank
You can save effect settings assigned to the [FILTER] knob and the [BEAT FX SELECT] and
[SOFTWARE FX SELECT] buttons to FX Banks, and load the FX Banks when you want to
use them.
Restrictions on operation
The following restrictions are applied when two computers (PC/Mac) are connected to the
unit.
• You can't load an FX Bank.
• You can't change effects by turning the [BROWSE] knob while pressing the [BEAT FX
SELECT] button or from [FX SETTING] of the [MENU] screen.
• The Beat FX assigned to the buttons reset to the default settings (i.e. to the effects
displayed on the [BEAT FX SELECT] buttons).
The restrictions are not applied in the following cases.
• Input selector switches of [CH 1] and [CH 2] are set to [
• Input selector switches of [CH 1] and [CH 2] are set to [
Setting an FX Bank
You can set up to four FX Banks using the Setting Utility or from [FX SETTING] on the
[MENU] screen.
Setting an FX Bank using Setting Utility
Read more: Launching Setting Utility (page 19)
1 Click the [FX BANK] tab.
Beat FX/software FX
A ].
B ].
63