PIONEER DJ DJM-S11 Instruction Manual page 87

Transport mode
You can control a track using the Performance Pads without using a turntable or multi player.
In Transport mode, functions are assigned to the Performance Pads as follows.
1 Press the [SAMPLER] button twice in succession.
The unit switches to Transport mode.
2 Press a Performance Pad.
— 1 /2 : Adjusts the pitch temporarily.
— 3 /4 : Adjusts the pitch permanently by nudging the track.
Press Performance Pad 3 or 4 while pressing the [SHIFT] button to reset the key.
— 5 : Turns the key lock function on and off.
When key lock is turned on, the pitch doesn't change – even if the tempo of a
track is changed. In this scenario, sound quality is lowered due to the digital
processing applied.
Press Performance Pad 5 while pressing the [SHIFT] button to switch the Serato
DVS playback mode between the internal mode and relative mode.
— 6 : Turns on the sync function.
Automatically synchronizes the tempo (pitch) of tracks on multiple decks when
the Serato DVS playback mode is set to relative mode.
Automatically synchronizes the tempo and beatgrids of tracks on multiple decks
when the Serato DVS playback mode is set to internal mode.
You can't use the sync function when the Serato DVS playback mode is set to
absolute mode.
Using the Performance Pads
Performance Pad no.
1 2
Pitch bend Pitch bend Pitch nudge
(-) (+)
5 6
Temp
Key lock Sync
87
3 4
Pitch nudge
(-) (+)
7 8
Play/
cue stop