Rear Panel - PIONEER DJ DJM-S11 Instruction Manual

Rear panel

1
9
button
1.
Turns the unit on and off.
2. Signal GND terminal (page 26)
Connect a turntable's ground wire.
Reduces unwanted noises that occur when a turntable is connected to the unit.
PHONO terminals (RCA) (page 26)
3.
Connect phono-level (MM cartridge) output devices.
• Do not input line-level signals to the terminals.
• Remove the short-circuit pin plugs from the terminals when connecting devices.
When you are not using the terminals, attach the short-circuit pin plugs to cut out
external noises.
WARNING
Keep the short-circuit pin plugs out of the reach of children and infants. If accidentally
swallowed, contact a doctor immediately.
LINE terminals (RCA) (page 26)
4.
Connect multi players or line-level output devices.
CDJ/CONTROLLER terminals (page 28)
5.
Connect compatible multi players or controllers.
2 3 4
10
5 6 2 3
11 12
12
Part names
4 7 8
13