PIONEER DJ DJM-S11 Instruction Manual page 30

1 Connect a turntable you want to control [DECK 1] to the
[PHONO] terminals for [CH 1], and a turntable you want to
control [DECK 2] to the [PHONO] terminals for [CH 2].
2 Connect the turntable ground wires to the [SIGNAL GND]
terminals on the unit.
3 Place control vinyl on the turntables.
4 Set the input selector switches of [CH 1] and [CH 2] on the
unit to [ A/B] (use [
Using multi players
This section describes an example of how to connect [DECK 1] and [DECK 2] of DJ software
with multi players.
Audio cable
L R
Multi player
USB storage
device
To power outlet
A] for the example above).
Power amplifier
30
DVS
Audio cable
L R
Multi player
USB storage
device
PC/Mac