PIONEER DJ DJM-S11 Instruction Manual page 23

Setting items
LOOP options.
PAD MODE options.
Fader Start options.
Set the range where sound
won't be output at both
sides of the crossfader.
Adjust the time it takes to
change the volume to
smooth the rapid volume
variation when you use the
crossfader.
Description
Mark the check box to activate the loop length set by
the slider.
Clear the check box to set the [AUTO LOOP] button on
the unit to work as the Auto Beat Loop button.
Mark the check box to enable Pad mode switching by
pressing a Pad mode button twice, three, or four times
in succession.
• When two computers (PC/Mac) are connected to the
unit and the input selector switches for CH 1 and CH
2 are set to the different computers, this setting will
be valid when it's enabled on each PC/Mac.
To enable the Fader Start function, select [ON] from the
pull-down list and mark the check box.
Read more: Using Fader Start (page 98)
Use the slider to set the range where sound will not be
output at the both ends of the crossfader.
• When two computers (PC/Mac) are connected to the
unit and the input selector switches for CH 1 and CH
2 are set to [LINE] or [PHONO], this setting is invalid
(the default setting is applied).
Adjust the time it takes to change the volume to smooth
the rapid variation in the volume when you use the
crossfader.
• When two computers (PC/Mac) are connected to the
unit, [NONE] is automatically applied in the following
cases.
– The input selector switches for CH 1 and CH 2 are
set to different computers (PC/Mac).
– The input selector switches for CH 1 and CH 2 are
set to [LINE] or [PHONO].
23
PC/Mac setup