PIONEER DJ DJM-S11 Instruction Manual page 117

• Insert and push the rotary knobs and fader knob (small) straight in to reattach them.
• Insert the axis through the center hole on the fader knob (small) to attach it.
• Check the orientation of the axes (D cut side) and attach the rotary knobs by aligning
them parallel to the axes.
• Do not attach the parts at an angle or insert them with excessive force, or you may
damage the parts.
• Assemble the fader knobs (large) as follows.
1
1. Insert the base from the side.
2. Insert the knob in the correct orientation.
3. Insert the indicating line in the correct orientation.
2 3 4
117
Settings