PIONEER DJ DJM-S11 Instruction Manual page 13

• Do not connect storage devices (e.g. USB drives/hard disks, etc.) to the [CDJ/
CONTROLLER] terminals.
Note that, if you turn the input selector switches, devices are forcibly disconnected from
any PC/Mac connected to the unit and data on the devices may break.
Kensington security slot
6.
Connect a cable lock.
7. MIC terminal (XLR or 1/4"/6.35 mm, TRS) (page 26)
AUX terminals (page 26)
8.
Connect a line-level input device.
AC IN (page 26)
9.
Connect to a power outlet with the supplied power cord.
10. MASTER 2 terminals (RCA) (page 27)
Connect to analog input terminals on a power amplifier, etc.
11. MASTER 1 terminals (balanced XLR) (page 27)
Connect to analog input terminals on a power amplifier, etc.
• Use the terminals for balanced output only.
• Do not connect a power cord from another product to the terminals.
• Do not connect to a terminal that can supply phantom power.
12. BOOTH terminals (1/4"/6.35 mm, TRS) (page 27)
Connect a booth monitor.
• Use the terminals for balanced output only.
13. USB ports (page 26)
Connect a PC/Mac.
13
Part names