PIONEER DJ DJM-S11 Instruction Manual page 114

Parts
Knob
Base
• Disassemble the fader knobs (large) as follows.
1
1. Lift the bottom edge of the indicating line with a fine-tipped tool.
– Lift the side where the bottom edge of the indicating line extends to the bottom of
the knob.
2. Pull out the indicating line (upwards).
3. Pull out the knob (upwards).
4. Pull out the base (sideways).
3 Remove six screws using a screwdriver.
• Use a size 1 screwdriver. Screwdrivers other than size 1 may damage the screws.
2 3 4
114
Settings