PIONEER DJ DJM-S11 Instruction Manual page 20

Setting the audio data output from the unit to a PC/Mac
1 Click the [MIXER OUTPUT] tab.
2 Click the pull-down list under [DJM-S11 Audio Output] and
select the audio data output from the unit to the PC/Mac.
Read more: Audio Output pull-down list (page 25)
3 Click the pull-down list under [USB Output Level] and select a
level of volume to output from the unit.
• Set the volume in [USB Output Level] when you can't produce as much volume as you
expect using the volume adjustment in your DJ application. Note that the sound may be
distorted if you set the volume too high.
20
PC/Mac setup