Installation and Setup DVS Control The Pioneer DJ DJM-S3 is a Serato DJ and DVS enabled device and does Follow the steps below to get the DJM-S3 set up with Serato DJ DVS not require aditional Serato DJ or DVS Expansion Pack licenses.
Page 4
NOTE: The SHIFT button is used with other buttons that have shift modifier functions. DJM-S3 Control Function FILTER Channel combo filter (lowpass/highpass) PARAMETER Adjust Parameter/amount MIC TONE Adjust MIC Tone MIC LEVEL Adjust MIC Level AUX IN TRIM Adjust Aux input volume...
DJM-S3 Control Function POWER Turn unit On/Off AC IN Connect AC power MASTER OUTPUT 2 RCA output MASTER OUTPUT 1 Balanced XLR output CH 2 INPUT Ch 2 Phono/Line Inputs CH 1 INPUT Ch 1 Phono/Line Inputs AUX IN RCA Aux Input...
MIDI Using the Tool Tips The MIDI feature in Serato DJ provides the ability to remap Serato DJ Click on the icon to enable Tool Tips. This is located in between the software functions to your primary Serato DJ controller, interface or mixer. MIDI and setup button in the top right hand corner of the screen.