PIONEER DJ DJM-S11 Instruction Manual page 66

4 Touch [BEAT FX SELECT/SOFTWARE FX SELECT] to set a
Beat FX to assign.
• If you touch an effect, the detailed setting screen appears.
• You can't change the software effects. Use DJ software to change effects to assign.
5 Touch [SMOOTH ECHO] to set the parameter.
6 Touch [MIC ECHO] to set the parameter.
7 Touch [BANK SAVE].
The setting is saved to the FX Bank.
Changing an assigned effect
You can change the effects assigned to the [BEAT FX SELECT] buttons using the following
methods.
– Set from the pull-down lists in Setting Utility (page 63).
– Turn the [BROWSE] knob while pressing the [BEAT FX SELECT] button on the unit.
– Change from the FX setting screen (page 65).
Loading an FX Bank
You can load an FX Bank using the buttons on the unit or from [FX SETTING] on the [MENU]
screen.
Loading an FX Bank using buttons on the unit
1 Press the [BEAT
[SHIFT] button.
FX Bank A, B, C, or D is loaded as follows.
— [BEAT
— [BEAT
] or [BEAT
] : Loads the previous FX Bank.
] : Loads the next FX Bank.
Beat FX/software FX
] button while pressing the
66