PIONEER DJ DJM-S11 Instruction Manual page 85

• Hot Cues are assigned to the Performance Pads as follows.
Hot Cue Hot Cue
1
Hot Cue Hot Cue
5
• Release the Performance Pad to mute the sound. Press the Performance Pad again to
start playback of the Hot Cue from the beginning.
Cue Loop mode
1 Press the [ROLL] button twice in succession.
The unit switches to Cue Loop mode.
2 During playback, press a Performance Pad at the point where
you want to set a loop point.
A loop point is set to a Hot Cue slot, and loop playback starts.
• Loop-in points are assigned to the Performance Pads as follows.
Loop Loop
1
Loop Loop
5
• The number of beats set for Auto Loop is applied to the loop length.
• A Hot Cue is used as a loop-in point for Cue Loop. Press a Performance Pad which is
set with a Hot Cue to start loop playback from the Hot Cue point.
• Press the [PARAMETER
length by half with each press.
• Press the [PARAMETER
length with each press.
Using the Performance Pads
Hot Cue Hot Cue
2 3 4
Hot Cue Hot Cue
6 7 8
Loop Loop
2 3 4
Loop Loop
6 7 8
] or [1/2X] button during loop playback to halve the loop
] or [2X] button during loop playback to double the loop
85