Longitudinal Stability Limiter And Warning Device - Manitou MT 733 EASY 75D ST5 S1 Operator's Manual

7 - LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE

The operator must respect the lift truck's load chart, and the operating mode according to the attachment.
This device warns the operator of the lift truck's longitudinal stability limits. However, lateral
stability can reduce the load chart in the upper part, and this reduction is not detected by
the device.
Depending on the type of work required, the longitudinal stability limiter and warning device
allows the operator to operate the lift truck in complete safety.
UPDATE: To gain maximum advantage from the longitudinal stability limiter and warning
device of your lift truck, contact your dealer to receive the latest version of the
software available.
USE ON FORKS
- By default, the device is in "HANDLING MODE each time the lift truck is started.
- Protection against tilting forwards during aggravating movements is guaranteed, except when the telescope is retracted.
A4-A5 : Very slow intermittent sound alarm.
N°297733
USE WITH BUCKET
- Place the lift truck in the transport position.
N°297733
- Hold down the
- Press this button again or switch off the ignition with the ignition key to return to "HANDLING" MODE.
- Protection against tilting forwards during aggravating movements is guaranteed, except when the telescope is retracted.
-The "BUCKET" mode deactivates automatically if the lift truck remains stationary.
N°297733
USE WITH LIFTING DEVICE (offering a higher margin of safety)
- Place the lift truck in the transport position.
- Press the
on. Hydraulic tilting movements are neutralised, as well as the lifting movement when the longitudinal stability limit
is reached (indicator lamp A8 lit).
- Press this button again or switch off the ignition with the ignition key to return to "HANDLING" MODE.
- Protection against tilting forwards during aggravating movements is guaranteed, except when the telescope is retracted.
t
IMPORTANT
X X
STANDARD
MODE
kg
X
kg
HALTED
A6 : Slow intermittent sound alarm.
X X
A7 : Fast intermittent sound alarm.
STANDARD
MODE
A8 : Very fast intermittent sound alarm.
kg
X X
kg
button, "BUCKET" MODE is confirmed by a sound signal and the indicator lamp coming on.
X X
STANDARD
MODE
kg
X
HALTED
kg
button, the "SUSPENDED LOAD" MODE is confirmed by a sound signal and the indicator lamp coming
t
"HANDLING" MODE
STATUS OF THE DEVICE
-No sound alarm.
-Indicator lamp A9 on.
"BUCKET" MODE
STATUS OF THE DEVICE
-No sound alarm.
-Indicator lamp A9 on.
"SUSPENDED LOAD" MODE
2 - 42
www.duma-rent.com
A8
A7
A6
A5
A4
A3
A2
A1
DRIVING TELESCOPE(S) RETRACTED
-No sound alarm.
-Indicator lamp A9 on.
DRIVING TELESCOPE(S) RETRACTED
-No sound alarm.
-Indicator lamp A9 on.
A9