Weekly Service Or Every 50 Hours Of Service; Check; Gear Box Oil Level; Tyre Pressures - Manitou MT 733 EASY 75D ST5 S1 Operator's Manual

Hide thumbs Also See for MT 733 EASY 75D ST5 S1:
Table of Contents

Advertisement

Ü  50H - WEEKLY SERVICE OR EVERY 50 HOURS OF SERVICE

CHECK

Park the lift truck on level ground with the boom raised, the engine stopped. Carry out
the check within 5 minutes of the engine being stopped.
Raise the boom and place the boom safety wedge on the rod of the lifting cylinder (
RECOMMENDATIONS: LIFT TRUCK MAINTENANCE INSTRUCTIONS).
- Remove the plastic cap 1.
- Pull out dipstick 2.
- Wipe the dipstick and check the correct level between the two MIN and MAX marks.
e
- If necessary, add oil (
- Visually check that there is no leakage or seepage.
CHECK
CHECK
Check that the air hose is correctly connected to the tyre valve before inflating and keep all persons at a distance during inflation. Follow the recommended tyre pressures.
- Check the wheel nut tightening. Non-compliance with this instruction can lead to deterioration and breakage of the
wheel bolts and distortion of the wheels.
- Check and restore tyre pressures if necessary (
NOTE: There is an OPTIONAL wheel tool kit.
CHECK
CHECK
Place the lift truck on level ground with the engine stopped.
- Visually check that there is no leakage or seepage.
- If there is any leakage or seepage, check the level:
• Remove the level plug 1, the oil should be flush with the edge of the hole.
• If necessary, add oil (
• Refit and tighten the level plug (tightening torque 34 - 49 N.m).
CHECK
CHECK
Place the lift truck on level ground with the engine stopped.
- Visually check that there is no leakage or seepage.
- If there is any leakage or seepage, check the level:
• Place level plug 1 in a horizontal position.
• Remove the level plug; the oil should be flush with the edge of the opening.
• If necessary, add oil (
• Refit and tighten the level plug (tightening torque 34 - 49 N.m).
t
t
IMPORTANT
 1000H: REPLACE Gear box oil).
t
IMPORTANT
e
 2 - DESCRIPTION: TYRES).
e
 LUBRICANTS AND FUEL) through the filler hole 2.
e
 LUBRICANTS AND FUEL) by the same hole.

Gear box oil level

e
 1 - INSTRUCTIONS AND SAFETY
t
Front axle differential seal
Rear axle differential seal
Front wheel reducer seals
Rear wheel reducer seals
3 - 16
www.duma-rent.com
1
2

Tyre pressures

Wheel nut tightening
2
1
1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt 933 easy 75d st5 s1Mt 1033 easy 75d st5 s1

Table of Contents