Manitou MT 733 EASY 75D ST5 S1 Basic Instruction Sheet

MT 733
EASY 75D
ST5 S1
Technical characteristics
Unladen weight
Weight at rated load
Weight on front axle (unladen)
Weight on rear axle (unladen)
Weight on front axle (at rated load)
Weight on rear axle (at rated load)
Traction force (unladen) (slippage)
Traction force at rated load (transmission setting)
Before starting, check:
þ That the battery cut-off is unlatched.
þ The condition of the tyres.
þ The hydraulic oil level.
þ The engine oil level.
þ The water level in the fuel pre-filter.
þ The brake fluid level.
þ The air filter.
þ The fuel level.
þ The lights.
þ The cleanliness and setting of the mirrors.
Control panel
A ENGINE WATER TEMPERATURE
B REV COUNTER
C FUEL LEVEL
D SCREEN DISPLAYS
ENGINE PREHEAT INDICATOR LAMP
ENGINE FAULT INDICATOR LAMP
CUT-OFF ENGINE INDICATOR LAMP
STOP
STEERING SYSTEM OIL PRESSURE
WARNING INDICATOR LAMP
GEAR BOX OIL PRESSURE WARNING
INDICATOR LAMP
GEAR BOX OIL TEMPERATURE
WARNING INDICATOR LAMP
A warning lamp indicates an operating fault.
Some indicator lamps are accompanied by an audible signal. Stop the forklift truck and
contact your dealer or rental company as quickly as possible.
This machine is an off-road forklift truck designed to operate on natural or undeveloped land, or construction sites.
BASIC INSTRUCTION SHEET
This document is a short recap on how to drive a forklift truck, and should in no way be a substitute for the instructions required by
MT 933
Directive 2006/42/EC Annex I section 1.7.4.
EASY 75D
The instructions, which should be read and understood by the operator beforehand, are available in the forklift truck's cab. All of the
ST5 S1
instructions, including safety instructions, in the manual should be implemented and enforced. The operator must have received proper
training and must comply with the rules in force on road traffic.
B
C
D
BRAKE FLUID LEVEL WARNING
INDICATOR LAMP
PARKING BRAKE INDICATOR LAMP
BATTERY CHARGE WARNING
INDICATOR LAMP
ENGINE OIL PRESSURE WARNING
INDICATOR LAMP
ENGINE WATER LEVEL WARNING
INDICATOR LAMP
AIR FILTER OR HYDRAULIC RETURN
FILTER CLOGGING WARNING
INDICATOR LAMP
EXHAUST DECONTAMINATION SYSTEM
WARNING INDICATOR LAMP
SOOT LEVEL
MT 733 MT 933
6700 kg 7170 kg
10000 kg 10470 kg
3290 kg 3470 kg
3410 kg 3700 kg
8730 kg 8880 kg
1270 kg 1590 kg
5510 daN 5700 daN
8360 daN 7650 daN
1 - Unlatch the battery cut-off.
2 - Get into the cab and close the door.
3 - Sit down in the seat and put on the seat belt.
4 - Deactivate the emergency stop button.
5 - Press down on the accelerator pedal.
6 - Turn the ignition key.
7 - Activate the reversing shift (FNR) to move forward or reverse.
8 - Choose your steering mode.
9 - Move up a gear.
BOOM ELECTRICAL
PREDISPOSITION (OPTION)
BOOM HEAD ELECTROVALVE (OPTION)
A
DISABLING "AGGRAVATING"
HYDRAULIC MOVEMENT CUT-OFF
HAZARD WARNING LIGHTS
REAR FOG LIGHTS
SELF-CLEANING FAN (OPTION)
STEERING SELECTION
TRANSMISSION CUT-OFF
ROTATING BEACON LIGHT
FRONT WORKLIGHTS (OPTION)
REAR WORKLIGHTS (OPTION)
www.duma-rent.com
435*
2810*
4729* (MT 733)
4678* (MT 933)
Starting the machine
Switches
ECS
Steering selection
1 - Front steering wheels (road mode).
2 - Front and rear steering wheels in opposite direction
3
(tight turning).
1
3 - Front and rear steering wheels in same direction
2
(crab steering).
Never change the steering mode whilst driving.
52614012EN (29/05/2019)
890*
2334*
* mm
FRONT AND REAR
WORKLIGHTS (OPTION)
BOOM HEAD WORKLIGHTS (OPTION)
REAR WINDOW DEFROSTER (OPTION)
ROOF WINDSCREEN WIPER + SIDE
WINDSCREEN WIPER (OPTION)
EASY HYDRAULIC ATTACHMENT
CONNECTION (OPTION)
BOOM SUSPENSION (OPTION)
EXHAUST REGENERATION
OPTION
GREEN ROTATING BEACON
LIGHT (OPTION)
ATTACHMENT HYDRAULIC
LOCKING (OPTION)
HYDRAULIC MOVEMENT
NEUTRALISATION