Check Hydraulic Oil Level; Check Windscreen Washer Liquid Level; Clean; Radiator Cores - Manitou MT 733 EASY 75D ST5 S1 Operator's Manual

CHECK
Place the lift truck on level ground with the engine stopped, and the boom retracted
and lowered as far as possible.
Use a clean funnel and clean the underside of the oil drum before filling.
- Check dipstick 1, the correct level must be at the level of the red dot.
e
- If necessary, add oil (
- Remove the cap 2.
- Add oil through filler port 2.
- Refit the cap.
- Visually check that there is no leakage or seepage.
CHECK
Place the lift truck on level ground.
- Loosen screw 1 and lift up the brake fluid and windscreen washer tank access panel 2.
- Visually check the level in the tank.
- If necessary add windscreen washer fluid (
- Remove the cap 3.
- Add windscreen washer liquid through filler port.
- Refit the cap.

CLEAN

In a polluting atmosphere, clean the radiator cores every day.
Do not use a water jet or high pressure steam as this could damage the fins.
- Open the engine cover.
- If necessary, clean the intake grille on the engine bonnet.
- Using a soft cloth, clean the radiator cores in order to remove as much dirt as possible.
- Clean the radiator using a compressed air jet aimed from the engine towards
the radiator, in the opposite direction to the cooling air flow.
t t
IMPORTANT
LUBRICANTS AND FUEL).
Windscreen washer liquid level
e
LUBRICANTS AND FUEL).
t t
IMPORTANT
Hydraulic oil level

Radiator cores

3 - 18
www.duma-rent.com
1
2
3
2
1
3