Manitou MT 733 EASY 75D ST5 S1 Operator's Manual page 153

Hide thumbs Also See for MT 733 EASY 75D ST5 S1:
Table of Contents

Advertisement

INTRODUCTION
- Your lift truck must be used with interchangeable equipment. These items are called: ATTACHMENTS.
- A wide range of attachments is available, guaranteed by MANITOU and designed to fit your lift truck perfectly.
Only attachments approved by MANITOU can be used on its lift trucks (
The manufacturer cannot be held responsible for any modifications or adaptations to attachments without its knowledge.
- The attachments are delivered with a load chart concerning your lift truck. The operator's manual and the load chart
should be kept in the places provided in the lift truck. For standard attachments, their use is governed by the instructions
contained on this notice.
Maximum loads are defined by the capacity of a lift truck taking account of the attachment's mass and centre of gravity.
- Some particular uses require the adaptation of the attachment which is not provided in the price-listed options. Optional
solutions exist, consult your dealer.
Depending on their size, certain attachments may, when the boom is lowered and retracted, come into contact with
the front tyres and cause damage to them if excavation is activated in the direction of the discharge.
TO PREVENT THIS RISK, EXTEND THE TELESCOPE TO A SUFFICIENT EXTENT FOR THE PARTICULAR LIFT TRUCK AND ATTACHMENT SO THAT THIS CONTACT IS NOT POSSIBLE.
SUSPENDED LOAD
Suspended loads MUST be handled with a lift truck designed for that purpose (
USE OF BUCKETS
MT 733/933/1033 lift trucks are essentially intended for handling, for which occasional use with the buckets CBC/CBR/CB4x1 is authorised (only with the boom fully
retracted, in order to reduce stresses on the boom head), but under no circumstances for difficult applications (quarry, waste, cereals, agriculture, etc).
d
IMPORTANT
d
IMPORTANT
Should the attachment have a lower capacity than the lift truck, never exceed this limit.
d
IMPORTANT
q
IMPORTANT
H - PICKING UP AND PUTTING DOWN A SUSPENDED LOAD).
q
IMPORTANT
d
e
TECHNICAL CHARACTERISTICS OF ATTACHMENTS).
d
d
q
e
 1 - OPERATING AND SAFETY INSTRUCTIONS: LOAD HANDLING INSTRUCTIONS:
q
4 - 3
www.duma-rent.com

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mt 933 easy 75d st5 s1Mt 1033 easy 75d st5 s1

Table of Contents