Manitou MT 733 EASY 75D ST5 S1 Operator's Manual page 149

TRANSPORT
Ensure that the safety instructions associated with the flatbed are complied with before
loading the lift truck and that the driver of the carrier vehicle is informed of the dimensions
and the weight of the lift truck (
Ensure that the platform is of sufficient size and load capacity for transporting the lift truck.
Check also the allowable ground contact pressure of the platform relative to the lift truck.
For lift trucks equipped with a turbo-charged engine, block off the exhaust outlet to avoid
rotation of the turbo shaft without lubrication when transporting the vehicle.
LOADING THE LIFT TRUCK
- Block the wheels of the platform.
- Attach the loading ramps to the platform in such a way as to give the shallowest
possible ramp angle for the lift truck.
- Load the lift truck parallel to the platform.
e
- Stop the lift truck ( 1 - OPERATING AND SAFETY INSTRUCTIONS: DRIVING
INSTRUCTIONS UNLADEN AND LADEN).
STOWING THE LIFT TRUCK
- Fix the chocks to the flatbed at the front and at the back of each tyre.
- Also fix the chocks to the flatbed on the inside of each tyre.
- Secure the lift truck to the flatbed with straps, in the anchoring points 1
provided.
- In order to ensure the lift truck is securely lashed to the flatbed, observe
the lashing angles (α) and (β) and the resistance (LC) of the straps.
- Tighten the straps.
t t
IMPORTANT
e
2 - DESCRIPTION: CHARACTERISTICS).
t t
IMPORTANT
3 - 43
www.duma-rent.com
Lift truck
α
30° ≤ α < 45°
LC = 6000 DaN
β
β
20° ≤ β < 55°
1
α
β
β
1
1