ADTRAN Total Access 544R System Manual page 44

Section 4 SHDSL RCU ATM User Interface Guide
S C > S
YSTEM ONFIG
Minimum required level for sending bridge mode log messages.
S C > S
YSTEM ONFIG
Minimum required level for sending CRAFT port log messages.
S C > S
YSTEM ONFIG
Minimum required level for sending low level HDLC log messages.
S C > S
YSTEM ONFIG
Minimum required level for sending Voice-over-ATM log messages.
S C > S
YSTEM ONFIG
Minimum required level for sending PPP-over-ATM log messages.
S C > S
YSTEM ONFIG
Minimum required level for sending FDL log messages.
S C > N
YSTEM ONFIG
Activate the network time and configure the server type, time zone and various other network time
parameters from this menu.
S C > N
YSTEM ONFIG
The unit time can be entered manually from the
NTP/SNTP server. The
communicates with the time server.
The server type defines the port on which the unit will listen to receive timing information from the time
server. The choices are
server running SNTP software on its TIME port. When set to
an SNTP server. The factory default is
S C > N
YSTEM ONFIG
This network timing feature can be turned on and off. It determines whether the unit will request and
receive time from a time server. The factory default is
44
> BRIDGE L
YSLOG
> MAINT L
YSLOG EVEL
> HDLC L
YSLOG EVEL
> VOATM L
YSLOG
> PPPOA L
YSLOG
> FDL L
YSLOG EVEL
T
ETWORK IME
T > S
ETWORK IME ERVER
menu includes all parameters relating to how the unit
N T
ETWORK IME
and . When set to
NT T SNTP
IME
.
SNTP
T > A
ETWORK IME CTIVE
© 2003 ADTRAN, Inc.
EVEL
EVEL
EVEL
T
YPE
menu, or the unit can receive time from an
S I
YSTEM NFO
, the unit will receive time from an NT
NT T
IME
, the unit will receive time directly from
SNTP
.
N
O
Total Access 544R System Manual
61200704L2-1B