ADTRAN Total Access 544R System Manual page 151

Total Access 544R System Manual
Host Name
Accepts and stores host names. You may either enter a name, an IP address, or a domain name directly
from this field. Click on the drop-down arrow to display a complete list of previously stored host
names.
P
ORT
Provides several port options. You may enter port numbers directly into this field to connect to
non-standard ports or select the drop-down combo-box to display the following options:
T
ELNET
E
CHO
D
ISCARD
D
AYTIME
C
HARGEN
Edit Entry
Changes either the unit name or the IP address of each host.
Press either
Tab, Return,
the IP address to move to the next field. If you press
or while the cursor is located in each IP field, that field
(.)
entry is deleted.
Add New
Prompts you for the same information as the
dialog box for new host. When enabled, the
request
D L
OMAIN OOK
name then appears in the
Delete
Removes a host name from the list; simply select the host name you want to remove, and, at the
prompt, click
D
ELETE
Connect
Establishes the Telnet session.
Disconnect
Terminates the Telnet session.
To re-establish the session, select
action restores the previous connection.
Transfer Cfg
This feature is used with ADTRAN products primarily for sending configuration files to the unit.
Exit
Ends the Telnet session and closes the Telnet screen.
61200704L2-1B
establishes a Telnet session
provides a loopback for troubleshooting
bit bucket; discards data
returns the time
displays as a unique character stream; used for self-tests
or a ) after each number in
period (.
U
via a DNS server on the network, rather than specifying an IP address. The
U
P
field.
H N
OST AME
.
from
C
ONNECT
© 2003 ADTRAN, Inc.
Return
E E
DIT NTRY
(Domain Name Server) feature allows users to
DNS
SE
or press
S M
ESSION ENU
Section 6 ADTRAN Utilities
three times. This
E
NTER
151