ADTRAN Total Access 544R System Manual page 130

Section 5 DLP-10
Perform Steps Below in the Order Listed
Loading Configuration using TFTP Server on Local Network
1. Connect to the unit using the 10/100B
If you are not already connected to the unit's
procedure in DLP-6, Telnetting to the Unit, to connect to the unit.
2. Log in to the unit using a FULL or SUPPORT level password (see DLP-3, Adding/Removing Telnet
Users and Changing Password Security Levels).
3. Verify the TFTP server is running on the network.
A TFTP server ships as part of the ADTRAN utilities. If using ADTRAN utilities, choose
S > P
TART
4. Go to the S U
YSTEM
5. Verify the T
RANSFER
6. Set the TFTP S
ERVER
Program.
If you are using the ADTRAN TFTP server, the IP address displays in the S
For other TFTP servers, please refer to the appropriate documentation.
7. Change TFTP S
ERVER
configuration file retrieved from the remote server. An example filename would be ta_iad.cfg.
Some TFTP servers constrain the format of the filename depending on the operating system of the
server. For example, a TFTP server running on a PC under Windows 3.1 may only permit 8.3 format
filenames (8 characters, period and three extension characters).
8. Select the L
OAD AND
Enter to confirm the request.
Y
9. View C T
URRENT RANSFER
10. When the upload has successfully completed, I
The unit is rebooted immediately after a configuration is successfully loaded. Any online
sessions will be terminated.
11. After an appropriate length of time, the user may Telnet back into the unit.
130
T interface.
ASE
> ADTRAN U
ROGRAMS
menu and select the C
TILITY
M is set to TFTP.
ETHOD
IP A to the IP address of the machine running the TFTP Server
DDRESS
F to a unique filename including path. This will be the name of the
ILENAME
U C menu field and press <Enter>.
SE ONFIG
S to verify the progress of the current upload.
TATUS
© 2003 ADTRAN, Inc.
Total Access 544R System Manual
port using Telnet client software, use the
10/100B T
ASE
> TFTP S
TILITIES ERVER
T
ONFIGURATION RANSFER
displays in the C
DLE URRENT
to start the server.
menu; press <Enter>.
field.
TATUS
T S field.
RANSFER TATUS
61200704L2-1B