Supplying Power To The Unit; Mounting Options - ADTRAN Total Access 544R System Manual

Section 3 Network Turnup Procedure
5.

SUPPLYING POWER TO THE UNIT

The AC powered unit comes equipped with a detachable power cord with a 3-prong plug for connecting to
a grounded power receptacle. As shipped, the unit is set to factory default conditions. After installing the
chassis, the unit is ready for power-up. To power-up the unit, ensure that the unit is properly connected to
an appropriate power source.
6.

MOUNTING OPTIONS

The Total Access 544R comes equipped for table top or wallmount use. The unit is shipped with two
wall-mount brackets (P/N 326542@C) and four screws (P/N 3276003003) which the customer must attach
to the base unit for wallmount use.
If wallmounted, the Total Access 544R must be mounted with the LEDs pointing
down or sideways as shown in the mounting instructions (P/N 64200600L1#T-19A).
28 © 2003 ADTRAN, Inc.
Total Access 544R System Manual
61200704L2-1B