L2 Protocol; L2 Protocol (Shdsl) - ADTRAN Total Access 544R System Manual

Section 4 SHDSL RCU ATM User Interface Guide
I > S
NTERFACES TATUS
This is a read-only field which displays the unique MAC address programmed at ADTRAN.
I > S
NTERFACES TATUS
Displays the data link layer protocol status.
L2 P
ROTOCOL
Use the L2 protocol menu to select the L2 protocol, configure the protocol specific parameters and view
the status as shown in Figure 5.
L2 P (SHDSL)
ROTOCOL
Configure the L2 Protocol parameters and view the status of the SHDSL interface using ATM protocol
from this menu.
L2 P (SHDSL) > P
ROTOCOL
Select the L2 protocol mode. The default is
56
> MAC A
DDRESS
> D L
ATA INK
Figure 5. L2 Protocol Menu
ROTOCOL
.
ATM
© 2003 ADTRAN, Inc.
Total Access 544R System Manual
61200704L2-1B