Saving And Loading Text Configuration Using The Terminal Command Line - ADTRAN Total Access 544R System Manual

DLP-13 Saving and Loading Text Configuration Using the Terminal
Command Line
Introduction
The unit has the ability to download a text file which contains the configuration of the entire unit. This
configuration may be altered in a text editor and then uploaded to the unit.
This DLP will explain how to save and load the configuration.
Prerequisite Procedures
You must connect to the unit with a VT100 terminal session (reference DLP-1and DLP-2) or via a Telnet
session (reference DLP-6, Telnetting to the Unit).
Tools and Materials Required
• Access to a PC or other computer connected to the LAN (Telnet access only).
• VT100 compatible terminal or computer with terminal emulation software.
• Appropriate cable to connect terminal to the unit (customer-provided).
• DB-9 female to RJ-45 female adapter for connecting to the
adapter is ADTRAN-proprietary and is shipped with the unit.
• Ethernet cable from the
• Use Ethernet crossover if going from the unit to a PC (customer-provided).
To prevent electrical shock, do not install equipment in a wet location or during a
lightning storm.
61200704L2-1B
port on the unit to a hub (customer-provided).
10/100B T
ASE
© 2003 ADTRAN, Inc.
port on the rear of the unit. This
CRAFT
137