P2A software
132
3.3.3.5
The transmitter saves the minimum or maximum value for each channel
(measured since the last voltage supply or since the last manual reset).
The required instrument file is marked.
1
Click on [Test/analyze transmitter].
The Properties of <Instrument type> <Serial number> dialogue is
opened with the Test/analyze transmitter register.
2
Mark Min./max. values.
Field/button
Channel
Value
Unit
3
Reset Min./max. values.
4
Click on [Reset the min./max. values].
5
Confirm control query to perform the reset.
- 3.3 Using the software
Displaying min./max. values
Explanation
View the min./max. values of each channel.
Min./max. of channel 1/2/3 (optional)
Min. or max. value, 1 decimal place.
Unit selected in Unit/analog output.