Adjusting The Transmitter - TESTO 6681 Instruction Manual

The values are reset to the default settings.
5 Click on [OK] or [Cancel] to close the dialogue.

3.3.4 Adjusting the transmitter

This function is used to adjust an attached instrument. The following
adjustments may be carried out using the software:
1-point adjustment (offset)
•
2-point adjustment (upper and lower adjustment point)
•
Analog adjustment (entry via assistant/wizard).
•
Also see volume 1, chapter 1.3.3 for this.
3.3.4.1 1-point adjustment
1
Expose the reference measuring instrument and the instrument to be
adjusted to the same constant conditions and wait for equalization
period to lapse.
2
Mark the instrument file of the connected instrument.
3 Click on [Adjusting the transmitter].
The Properties of <Instrument type> <Serial number> dialogue is
opened with the Adjusting the transmitter register.
4 Enter reference value and click on [Carry out 1-point adjustment].
5 Confirm confirmation request.
The adjustment is carried out.
P2A software
- 3.3 Using the software 133