Analyzing/Testing The Transmitter - TESTO 6681 Instruction Manual

You can also open parameter files that are stored in other directories.
1 Click on File > Open in the menu bar.
2 Select the storage location and click on the requisite file.
3 Click on [Open].
The selected file is opened. This can be changed and saved (see
chapter 3.3.2.2).
3.3.2.4 Copying and pasting parameters
The parameters of a parameter file can be transmitted to an instrument file or
another parameter file from the same instrument type.
1 Select file whose parameters are to be copied.
2 Click on Edit > Copy in the menu bar.
3
Select the file which is to be modified.
4 Click on Edit > Paste in the menu bar.
The parameters are transmitted to the file.
You can also use the common keyboard shortcuts for
copying and pasting, i.e. CTRL C and CTRL V.
Parameters can also be transmitted using drag & drop, where
you drag the icon of the parameter file onto the icon of the
target instrument file.
3.3.2.5 Deleting instrument/parameter file
Instrument/parameter files can be deleted from the file list.
1 Click on the file that is to be deleted with the right mouse button.
2 Select the command Delete in the context menu.
The instrument or parameter file is deleted from the list.

3.3.3 Analyzing/testing the transmitter

In this section, you can test the outputs of the connected instrument, read off
the limit values and reset the parameters to the factory settings.
The function is only available for instrument files.
3.3.3.1 Analyzing/testing the instrument

The required instrument file is marked.
P2A software
- 3.3 Using the software 127