TESTO 6681 Instruction Manual page 130

P2A software
130
Field/button
[Activate]
[Deactivate]
3 Click on [OK] or [Cancel] to close the dialogue.
The analog output returns to Measuring Mode again.
3.3.3.4

The required instrument file is marked.
1 Click on [Test/analyze transmitter].
The Properties of <Instrument type> <Serial number> dialogue is
opened with the Test/analyze transmitter register.
2 Mark Relay tests and test the values.
- 3.3 Using the software
Explanation
The entered default value is forwarded to the
corresponding analog output and to the test contacts by
clicking.
A warning informs that the value is being transmitted to
the connected instrument in the event of existing cabling.
Now check the analog output using a precise multimeter.
Finish entering the electrical variables at the analog
output.
The analog output returns to the Current reading again.
Testing switch output relays 1 to 4