Setting Up New User Accounts; Deleting User Accounts; Security, User Permissions Window - Arbiter Systems Power Sentinel 1133A Operation Manual

72
Figure 7.25: Security, User Permissions
Window
7.14.7

Setting Up New User Accounts

To set up user accounts and permissions, you will need permission to administer. To get permission
to administer, you will need to open the Configure User Logins screen.
1. Select Connection > Login As, or select Login As (the key symbol) on the Connection Toolbar
to open the Login window. Type in the Login Name, admin (or other Login Name with
Administer permission).
2. Tab to the Password window and type in 801n60 (or the new Login Name and Password with
permission to administer).
3. Select OK, and the desired functions should be available, seen by the buttons activating
(changing color). Select Connection > Configure > User Logins to activate the Configure
User Logins window seen in Figure 7.25.
4. Select New to start a new user account. PSCSV will supply a default Login Name that may
be changed. Type in the new Login Name and Password in the windows provided. Check the
appropriate boxes to enable / disable the desired permissions. Repeat this step to add any
other accounts.
5. Select Apply to install these new accounts, and click OK when finished to close the Edit User
window. All of the new Login Names and Passwords should now be installed into the 1133A
with which you were communicating.
KEEP AN ACCURATE RECORD OF THE NEW USER NAMES AND
7.14.8

Deleting User Accounts

1. Select Connection > Login As, or click the Key symbol, to activate the Login window. Log
in with an account that grants permission to administer. (All of the icons in the PSCSV
window should appear.)
PASSWORDS.
Configuring the Model 1133A