Front And Rear Panels; Introduction; Front Panel Controls And Indicators; Model 1133A Front Panel Description - Arbiter Systems Power Sentinel 1133A Operation Manual

Chapter 2

Front and Rear Panels

2.1

Introduction

This section identifies the connectors, controls, and displays found on the front and rear panels of
the Model 1133A. Review all of these items prior to connecting cables to and configuring the Model
1133A.
2.2

Front Panel Controls and Indicators

The Model 1133A front panel has a two-line by 20-character, back lit Liquid Crystal Display (LCD),
four annunciator LED's, and an eight-button keypad. All of the keys are informational only and
cannot be used to configure the 1133A. Illustrated in Figure 2.1 are the displays and controls used
to determine and configure the operating state of the 1133A.
Brief definitions for the annunciator LEDs are found in Table 2.1, and definitions for keys in
Table 2.2. Accept for the STATUS key on the upper-right position, all of the keys switch the
display to read the named electrical parameter(s). For example, press VOLTAGE/CURRENT to
view all configured voltages and currents, including sequence components. Press the status key to
view all of the main 1133A system details, like Receiver Status, Time and Date.
Figure 2.1: Model 1133A Front Panel Description