Lightware DP-OPT-TX150 User Manual page 29


  
5. Firmware Upgrade
Step 4. Finish.
If the upgrade of a device is finished, the log can be opened
by the View button on the right When all the tasks are finished,
a window appears. Click OK to close and Next to display the
summary page.
Repeat button starts the process again with the selected
device(s). Open logs button opens the temporary folder where
the logs can be found. Export logs by saving the files as a zipped
file.
Press Exit to close the program.
If the upgrade failed, the progress bar of the device is changed to red; restart the devices and repeat the
process.

ATTENTION! However the device is rebooted after the firmware upgrade, switching it off and on again is
recommended.
DP-OPT-TX150, DP-OPT-RX150 – User's Manual
Applied firmware package: v1.1.13 | LDC software: v2.5.1b5
29