Table of Contents
Advertisement
5. Firmware Upgrade
5.4. Detailed Instructions
5.4.1. Establish the Connection
Make sure that the computer and the device are connected via USB. If you connect Transmitter, it must be in
Configuration mode.
5.4.2. Start the LDU and Follow the Instructions
After launching LDU the welcome screen will appear. Pressing the
supported devices. Click on the Extender button on the main screen.
A
button a list will appear showing the
Welcome screen
Applied firmware package: v1.1.13 | LDC software: v2.5.1b5
DP-OPT-TX150, DP-OPT-RX150 – User's Manual
Step 1. Select the Package.
Click on the Browse button and select the .lfp file that will be used for the upgrade.
Package information is displayed:
▪
General version info, creation date, short description,
▪
Devices which are compatible with the firmware,
▪
Components in the package with release notes.
Click on the Next button and follow the instructions.
TIPS AND TRICKS:
Files with .lfp extension are associated to LDU during installation. If you double click on
the ".lfp" file, the application is launched, the package is loaded automatically and above screen is shown.
26
Advertisement
Table of Contents
