7: Output Tab - Johnson Controls IFI-WS Installation And Operation Manual

Workstation Settings
4.2.7 Output Tab
An output is the format of data that is sent to a local event printer, pager, and/or email. Once output formats are
created and named, they appear on a list of choices on the Event Printer, Pager/Modem, and Email tabs.
Although any of the listed output formats can be used, it is highly recommended that Available Fields' User Defined
option be selected as a pager format. That selection allows the user to enter brief descriptions for the user-defined
messages. Once "User Defined" is displayed in the format fields, the User Defined Messages area of the window is
activated. Click in the field adjacent to the "User Defined Messages" name and enter a brief message that can be
received on a pager. Output tab settings are described in
Setting
Buttons:
Add Format
Delete Format
Output Formats:
Output Formats Field
Available Fields
Format Fields
User Defined Messages: Active only when the "User Defined" output format is selected in the Format Fields list.
Click the field to the right of the event types to enter/modify the message associated with each type of event.The
"Other" message is used for Mass Notification events and other event types not included in the list.
44
Table
Table 4.8 Output Tab Settings
Possible Settings
Click to display an output format name dialog box. Enter a
unique output format name and click Yes. The name is
displayed in the Output Formats field.
Click to delete the output format name displayed in the Output
Formats list. Click Yes in response to the output format delete
confirmation prompt.
• If the output format is NOT used in a printer, pager, modem,
or email setup, the selected Output Format is deleted.
• If the output format IS used in a printer, pager, modem, or
email setup, a message displays indicating that the output
format cannot be deleted. In order to delete the format, the
setups using the format must be configured to use another
output format or be deleted.
Listed Outputs Click the down-arrow to display the available output formats
(added formats display automatically). The selected output is
configured/modified using the Available Fields/Format Fields
lists.
• Action
Lists the types of information that can be included in the
• Actual Time
selected output. Add fields using any of the following methods:
• Card Facility Code
• Select one at a time - Double click on the entry or click on
• Card Number
an entry and then click on the right arrow button.
• Card Time
• Select several - Press and hold the Ctrl key while selecting
• Description
all desired fields. Then click the right arrow button.
• Network Alias
• Select all - Click the double right-arrow button.
• Node Alias
Selecting "User Defined" activates the User Defined Messages
• Point Alias
field (see below).
• Point Type
• Status
• User Defined
Selected Fields Displays the format fields configured for the output format
displayed in the Output Formats field. To remove fields from the
output, select the field name(s) from the list (see above) and use
the left arrows to remove from the output.
IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A 12/11/2014
4.8.
Description
Workstation Settings