2: Network (Lan) Connection - Johnson Controls IFI-WS Installation And Operation Manual

Hardware Configuration
2.2.2 Network (LAN) Connection
Make one of the following connections as applicable:
Use this connection for an IFI-WS that will use Ethernet for communications.
For an IFI-WS that will not be using Ethernet for communications, a single Ethernet patch cable must be
plugged in both RJ45 ports to create a loop-back between the Ethernet ports.
22
Figure 2.2 LAN Connection
Figure 2.3 Stand-alone IFI-WS
IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A 12/11/2014
Connections
Not Used In This
Configuration
Ethernet
Cable
Ethernet Patch
Cable