Section 4 Workstation Settings; Windows Settings - Johnson Controls IFI-WS Installation And Operation Manual

Section 4 Workstation Settings

4.1 Windows Settings

Except for the administrator password, all Windows settings are set up at the factory and must remain as they are for
the facilities monitoring software application to function and display properly. Only change these Windows settings
with the approval of a Technical Services Representative. The default Windows settings are as follows:
Setting
Windows Update*
IP Address
Power Options
Time Zone
Daylight Savings Time
Display Resolution
Note: *Many Windows updates require a system reboot to complete the installation. Therefore, it is
recommended that the workstation be attended during updates. Once updates are completed, ensure
the workstation application is running.
IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A 12/11/2014
Table 4.1 Windows Settings
Required Value
Check for updates but let me choose whether to download and
install them
Valid IP Address required if connecting to LAN
Display: Turn off the display: Never
Computer: Put the computer to sleep: Never
Local time zone
Set appropriate for local area
1920 x 1080
37