Workstation Settings; 1: Options Window Command Buttons; 2: General Tab - Johnson Controls IFI-WS Installation And Operation Manual

Workstation Settings

4.2 Workstation Settings
The workstation settings described in this section are available from the Configure > Options menu. These settings
apply only to the local workstation.
4.2.1 Options Window Command Buttons
On-screen command buttons common to the Options window tabs are described in
Button
Apply
OK
Cancel
4.2.2 General Tab
The General tab allows the Administrator to configure overall settings for workstation operations as described in
Table 4.3.
Setting Possible Settings
Event Label:
The event label is displayed in the event list when the point is in an off normal condition. The event label consists of a
combination of network, node, and point labels as described below.
Network Label Network Alias
None
Node Label Node Alias
Node Number
None
Point Label Point Alias
Point Number
None
Icon Label:
The icon label is displayed below the icon on the graphics screen. Icon label options are described below.
Event Label
Description
None
History Backup:
The external backup file is named with the date: YYYMMDD.HIS. History backup options are described below.
Number of days before Disabled
performing history
1 - 62
backup
Number of days to 0 - 30
keep in history
following backup
Check Boxes:
Options selectable via check boxes are described below.
38
Table 4.2 Options Window Command Buttons
Saves the settings, but keeps the Options window open.
Saves the settings and closes the Options window.
Closes the Options window without saving settings.
Table 4.3 General Tab Settings
Display the user-defined description of the network.
Do not display the assigned network alias.
Display the user-defined description of the node.
Display the system assigned node number.
Do not display the assigned node alias or number.
Display the user-defined description of the point.
Display the system assigned point number.
Do not display the assigned point alias or number.
Display the event label as described above.
Display the point description programmed into the FACP.
Display nothing.
Do not back up history.
Interval in days that history backup is performed.
Length of time in days to retain a history backup.
IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A 12/11/2014
Table 4.2.
Description
Description
Workstation Settings
Comments