5: Pager/Modem Tab - Johnson Controls IFI-WS Installation And Operation Manual

Workstation Settings
4.2.5 Pager/Modem Tab
The Pager/Modem tab allows the user to configure the optional paging capabilities of the workstation. These settings
match the settings required for the specific pager. Settings are described in
Pager notifications are only intended to be transmitted to a limited number of staff for maintenance and system status
purposes. This feature is approved by UL as supplementary.
Setting
Buttons:
Add Pager
Delete Pager
Pager List: Click the fields below the headings to enter/modify text or select options from a drop-down list.
Pager
Phone
PIN
Enabled/Disabled
All Day
Start Time
Stop Time
Monitoring
Output
Sample Output: Displays a sample of the event message that will be sent to the selected pager using the format
configured above.
Modem: Displays settings for the connected modem.
Dialing Delay (Sec.)
Retry Delay (Sec.)
Number of Retries
Time Out (Sec.)
IFI-WS Installation and Operation Manual – P/N LS10050-000JC-E:A 12/11/2014
Table 4.6 Pager/Modem Tab Settings
Possible Settings
Click to display a pager name dialog box. Enter a unique pager
name and click Yes. The pager name is displayed in the pagers
list.
Highlight a pager name in the list and click to delete it.
Text Field Automatically populates the pager name when a pager is added.
Text Field Enter the pager phone number.
Text Field Enter the pager PIN number.
Enabled Enable the pager selected in the pager list field.
Disabled Disable the pager selected in the pager list field.
Yes Send the event message whenever it occurs.
No Send the event message at configured start and stop times.
12 AM to 11 PM in Activates only when "All Day>No" setting is selected. Select the
Hourly Increments times from the drop-down list.
Default Use the system default monitoring profile.
User-defined Select a user-defined monitoring profile from the drop-down list.
Monitoring Profiles Refer to
Default Use the system default output format.
User-defined Output Select a user-defined output format from the drop-down list.
Format Refer to
10 to 30 seconds The time the modem waits before dialing the pager phone
number after the event occurs. (Default is 10 seconds)
10 to 30 seconds The time the modem waits before re-dialing the pager phone
number. (Default is 10 seconds)
0 to 3 The number of times the modem tries to send the message if it
fails. (Default is 2)
45 to 300 seconds The maximum time the modem will spend trying to contact the
pager. (Default is 90 seconds)
Table 4.6.
Description
3.4, "Adding to an Existing Network".
4.2.7, "Output Tab".
Workstation Settings
41