Special Safety Notes; Cleaning; General; Cleaning Procedure - Atmos MEDAP LS FLOW Operating Instructions Manual

6.2

Special safety notes

6.3

Cleaning

6.3.1

General

6.3.2

Cleaning procedure

 Use the correct dose of multi-purpose detergent with water for the degree of surface
contamination and in accordance with the instructions of the detergent manufacturer.
 Thoroughly wipe off the product with a soft cloth slightly dampened in a multi-purpose
detergent solution.
 Ensure that the product is free from contamination and encapsulated particles of grime.
 Thoroughly wipe off the product with a soft cloth dipped in clean water.
 Ensure that the product is free of detergent residues.
 Dry the product with a dry, absorbent and lint-free cloth.
 This will help to reduce pathogen growth on the product's surface.
 Wipe or spray disinfect the product after every cleaning.
DANGER!
Material damage!
Various components in the product are made of plastic materials. Solvents and
some disinfectants and some cleaning agents can soften plastic or cause tension
fissures.
Never use detergents that contain alcohol. Observe detergent and disinfectant
specifications.
NOTE
Use only multi-purpose cleaners which are slightly alkaline (soap solution) and
which contain surfactants and phosphates as the active cleaning agents.
In the event of heavily contaminated surfaces, use concentrated multi-purpose
detergent.
CAUTION!
Improper cleaning can cause property damage!
Residues of physiological saline solutions (e.g. sodium chloride) can attack the
surfaces of the product.
Remove residues of physiological saline solutions with a cloth dipped in clean
water. Then dry the product with a dry, lint-free cloth.
CAUTION!
Improper cleaning can cause property damage!
Do not spray cleaning agent directly into the joints or gaps and never use a high-
pressure cleaning unit!
Cleaning and disinfection
Special safety notes
GA 5752 5678 GB 07
6
19