Volkswagen Passat 2011 Workshop Manual page 102

Passat 2011 ➤ , Passat Variant 2011 ➤
Brake systems - Edition 02.2014
– Remove bolts -arrows- of bracket.
– Remove tunnel cross member by undoing bolts -arrows-.
– Remove clamping sleeve -1-.
– Remove particulate filter and place on subframe.
– Tie exhaust pipe up.
– Seal openings with sealing plug set for engine - VAS 6122- .
Note
Particulate filter does not have to be removed from the vehicle in
vehicles with front-wheel drive.
Four-wheel drive vehicles:
– Remove particulate filter as complete unit ⇒ Rep. gr. 26 ;
Exhaust gas treatment; Removing and installing particulate
filter
Vehicles with manual gearboxes
– Pull return hose -2- for clutch sender cylinder -3- off brake fluid
reservoir -4-.
– Seal return hose -2- for clutch sender cylinder -3- with sealing
tool - T10249- -1-.
– Tie return hose -2- in place above.
98
Rep. gr.47 - Brakes - hydraulics