Volkswagen Passat 2011 Workshop Manual page 72

Passat 2011 ➤ , Passat Variant 2011 ➤
Brake systems - Edition 02.2014
– Unscrew nuts -1 and 2-.
– Carefully remove foot pedal cluster.
Installing
Install in reverse order. Note the following points:
– Connect brake pedal to brake servo
Specified torques:
Component
Brake pedal to pedal cluster
♦ Use new nut
Pedal cluster to plenum chamber bulkhead/brake ser‐
vo
♦ Use new nuts
4.5.2 Removing and installing mounting
bracket, right-hand drive vehicle
Special tools and workshop equipment required
♦ Torque wrench - V.A.G 1331-
Removing
– Undo bolts -arrows- and remove footwell trim -1-.
– Open flap -2- and remove.
– Release diagnostics connector -3- and pull off.
– Remove footwell trim -1- in -direction of arrow-.
– Separate brake pedal from brake servo
– Remove brake pedal
68
Rep. gr.46 - Brakes - mechanism
⇒ page 63
⇒ page 62
⇒ page 63 .
.
Specified torque
.
25 Nm
25 Nm