– Undo and remove securing bolt -1-.
– Loosen bolt -2-.
– Open clamp between particulate filter and turbocharger and
remove.
– Remove Lambda probe - G39- -3-.
– Remove exhaust gas temperature sender -1-.
– Remove exhaust gas temperature sender -1- with tool set 17
mm - T10395- and torque wrench - V.A.G 1331- as shown.
– Release connector -1- and pull off.
– Unclip bracket -2- for electrical wiring to oil level and oil tem‐
perature sender - G266- on subframe.
Passat 2011 ➤ , Passat Variant 2011 ➤
Brake systems - Edition 02.2014
3. Brake servo and brake master cylinder
111