Table of Contents
Advertisement
250
MULTIMEDIA
Setting Name
Wheel Alignment Mode
Four Corner Air Suspension Modes
AUX Switches — If Equipped
When the AUX Switches button is pressed on the touchscreen, the system displays the options related to the four vehicle AUX switches.
Setting Name
AUX 1-4
Description
This setting must be activated before performing a wheel alignment.
Refer to an authorized dealer for further information.
There are three air suspension modes designed to protect the system in
unique situations. Tire Jack Mode is selected to assist in changing a
spare tire. Transport Mode is selected to assist when the vehicle is being
flat bed towed. Wheel Alignment Mode is selected before performing a
wheel alignment. Refer to an authorized dealer for information.
Description
This setting will adjust the type and power source for the four vehicle AUX
switches. There are two types: "Latching" and "Momentary". The power
source for the AUX switches can either be set to run off the "Battery" or
from the "Ignition". In addition to setting the type and power source, you
can set if the vehicle will recall the previous state at which the AUX
switches were set. The Recalled Last State setting can be set to "On" or
"Off". Last state conditions are met only if the type is set to Latching and
the power source is set to Ignition.
Advertisement
Table of Contents
