Table of Contents
Advertisement
What is the weight limit (child's weight + weight of the child
restraint) for using the LATCH anchorage system to attach
the child restraint?
Can the LATCH anchorages and the seat belt be used
together to attach a rear-facing or forward-facing child
restraint?
Can a child seat be installed in the center position using the
inner LATCH lower anchorages from the outboard seating
positions?
Can two child restraints be attached using a common lower
LATCH anchorage?
Can the rear-facing child restraint touch the back of the front
passenger seat?
Can the rear head restraints be removed?
Frequently Asked Questions About Installing Child Restraints With LATCH
Use the LATCH anchorage system until the combined weight
of the child and the child restraint is 65 lbs (29.5 kg). Use
65 lbs (29.5 kg)
the seat belt and tether anchor instead of the LATCH system
once the combined weight is more than 65 lbs (29.5 kg).
Do not use the seat belt when you use the LATCH anchorage
system to attach a rear-facing or forward-facing child
restraint.
No
Booster seats may be attached to the LATCH anchorages if
allowed by the booster seat manufacturer. See your booster
seat owner's manual for more information.
Quad Cab or Crew with Full bench rear seat: Use the seat
No
belt and tether anchor to install a child seat in the center
seating position
Never "share" a LATCH anchorage with two or more child
restraints. If the center position does not have dedicated
No
LATCH lower anchorages, use the seat belt to install a child
seat in the center position next to a child seat using the
LATCH anchorages in an outboard position.
The child seat may touch the back of the front passenger
seat if the child restraint manufacturer also allows contact.
Yes
See your child restraint owner's manual for more
information.
No
SAFETY
361
6
Advertisement
Table of Contents
