Table of Contents
Advertisement
Positive Battery Post
See below steps to prepare for jump starting:
1. Apply the parking brake, shift the
automatic transmission into PARK and
turn the ignition OFF.
2. Turn off the heater, radio, and all electrical
accessories.
3. Pull upward and remove the protective
cover over the remote positive (+) battery
post.
4. If using another vehicle to jump start the
battery, park the vehicle within the jumper
cables' reach, apply the parking brake and
make sure the ignition is OFF.
WARNING!
Take care to avoid the radiator cooling fan
whenever the hood is raised. It can start
anytime the ignition switch is ON. You can
be injured by moving fan blades.
Remove any metal jewelry such as rings,
watch bands and bracelets that could
make an inadvertent electrical contact. You
could be seriously injured.
Batteries contain sulfuric acid that can
burn your skin or eyes and generate
hydrogen gas which is flammable and
explosive. Keep open flames or sparks
away from the battery.
WARNING!
Do not allow vehicles to touch each other as
this could establish a ground connection and
personal injury could result.
IN CASE OF EMERGENCY
J
S
P
UMP
TARTING
ROCEDURE
WARNING!
Failure to follow this jump starting procedure
could result in personal injury or property
damage due to battery explosion.
CAUTION!
Failure to follow these procedures could
result in damage to the charging system of
the booster vehicle or the discharged vehicle.
Connecting The Jumper Cables
Jumper Cable Connections
387
7
Advertisement
Table of Contents
